Configure the Beetel 220 BXI DSL2+ modem in pppoe mode
Type 192.168.1.1 (gateway i.e. modem) in the browser.
↓
Username : admin
Password : password
↓
Start configuring the router
↓
Click the WAN link given on the left side
↓
click the edit button
↓
Enter the vpi and vci values
VPI : 1
VCI : 32
ne ↓ xt
Connection type : PPP over ethernet (PPPoE)
↓
Encapsulation Mode : LLC/SNAP-BRIDGING
ne ↓ xt
PPP Username : (your-user-name_dsl@airtelbroadband.in)
PPP password : **********
PPPoE Service Name : airtel
Authentication mode : AUTO
ne ↓ xt
Enable IGMP Multicast : uncheck it (disable)
↓
Enable WAN Service : check it (enable)
↓
Service Name : pppoe_1_32_1
ne ↓ xt
WAN Setup – Summary : Click SAVE
↓
SAVE/REBOOT
↓
Modem Configured
Network Configuration on Computer
static ip : 192. 168.1.2 -192.168.1.254 (ip range, enter any one)
subnet mask : 255.255.255.0
gateway : 192.168.1.1
dns : 202.56.215.54, 202.56.215.55, 202.56.215.6, 202.56.230.6
Filed under: Broadband, How To, Linux, Open Source, Technology, Tips & Tricks, Ubuntu , Airtel, Beetel 220 BXI, Broadband, Linux, Modem
Recent Comments